Principle of steam electric iron

1. Temperature-regulating steam-jet electric iron 

The temperature-regulating steam-jet electric iron is constructed by adding a steam injection device on the basis of ordinary electric irons. It has the dual function of temperature-regulating steam injection. There are several steam spray holes on the soleplate of this electric iron. A sealed water storage tank is arranged on the soleplate and the heating element. The water inlet of the water storage tank is set at the front end of the handle, the steam outlet pipe and the water storage tank Connected, there is a valve on the steam outlet pipe, and the button on the handle controls the steam injection or stops the steam injection. When the electric heating element is energized to heat the bottom plate, it also heats the water in the water tank, and the water boils and vaporizes to produce steam. The water vapor is ejected from the steam spray hole on the bottom plate through the pipe, so that the clothes to be ironed are wetted by the water vapor. The rear half of the water reservoir is separated from the bottom plate. When steam spraying is not required, the iron only needs to be erected, and the water in the water reservoir will stop heating and save heat.

2. Temperature-regulating steam spray-type electric iron 

The temperature-regulating steam spray-type electric iron is formed by adding an atomizing device on the basis of the steam-jet type electric iron. In addition to the temperature-regulating steam spray type electric iron, it can also spray water mist on the clothes, which can make thicker clothes fully moist and improve the ironing effect. The structure of the atomization device is to extend the lower part of a capillary tube into the lower part of the water tank and immerse it in water. The upper part of the capillary tube leads to the spray hole with valve. When working, part of the heated water vapor enters the top of the water storage tank through the steam inlet pipe to maintain a certain pressure on the water surface of the water storage tank. When spraying is required, press the spray button switch to open the spray valve and the water vapor passes through the spray The nozzle spouts while the capillary tube sucks up the water.